SM811

Adhesive

Lightweight Bricks & Lightweight Concrete Panels

Thin Bed

product information

Usage

  • Installation of adhesive used in light weight brick layering (AAC) or aerated concrete blocks

Advantages

  • Higher adhesive strength and flexibility only at a thickness of +-3mm
  • Can be used for interior and exterior walls
  • Neater work results

Product Information

Packaging
40 Kg
Application Thickness
3 mm
Spreadability
±16m²
Description Size Spreadability Application Thickness Water Requirement Weight
Lightweight Brick/ Aerated Concrete Block 7.5 cm ±16m² 3mm ±10-10.5 lt 40kg
10cm ±12m²
Lightweight Concrete Panel 15cm 57 meters run

Adhesive Wall

Tools used :
Mixer
Notched Trowel
Bucket
Cement Spoon

**The above tools are recommended for the use of wall adhesive cement.

Usage Instructions :

Clean lightweight bricks/concrete

from dust and sprinkle water on the surface until damp.

Pour cement into a bucket

mix with water, and stir evenly with a mixer/cement spoon.

Apply the cement evenly

Menggunakan sendok semen/trowel bergerigi di atas permukaan bata ringan/panel beton ringan secara merata.

Stack, attach, and press

lightweight bricks/lightweight concrete panels against each other. If necessary, gently tap with a rubber mallet for better adhesion.

* untuk sak 40 kg tebal hebel 12 cm aplikasi 10m2, tebal hebel 7.5cm aplikasi 16m2

* untuk sak 50 kg hebel 12 cm aplikasi 12.5m2, tebal hebel 7.5cm aplikasi 20m2

* kebutuhan air 1 sak 40 kg 8.5-9L (40 kg), sak 50 kg 11-11.5L)

Calculate estimated Mortar requirements for your project

COUNT HERE
Kembali